Current Directions in Biomedical Engineering (Sep 2023)

Acoustic Emission Analysis (AEA) in unilateral leg amputees as a future quality tool in orthopaedic technology to evaluate the adjusted prosthesis in relation to gonarthritis

  • Subke Joerg,
  • Keller Adeline,
  • Hermawan Hermawan,
  • Schmeiler Michael,
  • Schneider Benedict,
  • Schwalbe Hans-Joachim

DOI
https://doi.org/10.1515/cdbme-2023-1179
Journal volume & issue
Vol. 9, no. 1
pp. 713 – 716

Abstract

Read online

In orthopaedic technology unilateral leg amputees are provided with prosthesis which are attached through a shaft to the remaining part of the leg. The prosthesis legs are built according to manufacturer’s specifications and get adjusted to the individual needs through motion analysis. If the prosthesis is not adjusted correctly to the individual needs of the user, the chance for development of arthritis in the remaining knee joint is greatly increased. The goal of this paper is to develop a procedure based on AEA to detect signs of arthritis in the remaining knee joint early and the base of a procedure for a future assessment of the quality of the care. The measurement system consists of the AEA - measurement device, a force plate to measure ground reaction forces, two strain gauges which are attached to handles on a test rig and two video cameras which record the movement from frontal and sagittal view. The amputee performs a standard movement in the test rig which consists of three knee bends in ten seconds while wearing the prosthesis legs. The test rig is provided so the amputee can support themselves using arms and hands as prosthesis’ support during the extension phase of the knee bend. The posture and load of the knee joint during the movement is analyzed with the video and force data. The ground reaction forces show the load distribution between the remaining leg and the prosthesis and its support during the movement. The hand forces give clues how well the amputee can balance and which arm is favored under load. By combining kinematic data and AEA the state of the load transfer zones can be evaluated. Thus, it’s possible to examine the remaining knee joint for defects and evaluate the quality of the prosthesis adjustment.

Keywords