Experimental and Numerical Investigation on the Interaction between Hydraulic Fractures and Vugs in Fracture-Cavity Carbonate Reservoirs

Abstract

In karstic-fractured carbonate reservoirs, most of the oil resources are hosted in vugs. Connecting as many vugs as possible by hydraulic fracturing is the key to achieving effective development. However, the interaction mechanism between vugs and hydraulic fractures is complicated and has not been fully revealed. In this study, both experimental and numerical simulations were implemented to investigate the interaction between vugs and hydraulic fractures. Key factors, such as vug size, horizontal stress difference, and the internal pressure of the vug, were considered. The results showed that the vug played an important role in the propagation of hydraulic fractures. Three interaction modes of vugs and hydraulic fractures were observed: crossing, arresting, and bypassing. Owing to the variation of the stress concentration existing around the vug, the hydraulic fracture could be arrested by a small vug but would bypass a vug with a larger size. Whether the hydraulic fracture could communicate with the vug was mainly controlled by the horizontal stress difference. Under large horizontal stress differences (≥20 MPa), the hydraulic fracture could cross and connect multiple vugs. The difference between the horizontal minimum stress and the internal pressure of the vug was also particularly significant for fracture propagation. The smaller the difference, the easier the fracture communicated with the vug. The above findings would be valuable and constructive for the optimal design of field hydraulic fracturing in karstic-fractured carbonate reservoirs.

Keywords

• carbonate reservoir
• vug
• hydraulic fracture propagation
• physical simulation
• XFEM model