Results in Materials (Dec 2023)
Experimental statistical modeling of tensile properties and flexural stiffness of recycled high-density polyethylene (rHDPE) thermoplastic using response surface methodology (RSM)
Abstract
The widespread use of thermoplastic polymer products, particularly high-density polyethylene (HDPE), in daily consumer goods has led to the generation and accumulation of large amounts of plastic waste. This waste poses a significant threat to the environment due to the challenges and limitations in managing plastic waste effectively. Establishing new large volume applications of recycled HDPE (rHDPE) would incentivize recycling by creating new revenue streams. Before rHDPE (specifically rHDPE-talc blends) can be used more heavily in lieu of or in addition to virgin HDPE (vHDPE), its material properties in relation to application temperatures must be better understood. This study focused on characterizing tensile and flexural properties of rHDPE-talc blends across broad talc filler content and temperature ranges. Experimentally, tensile strength, elastic modulus, storage modulus, and nominal yield strain data were collected. Tensile strength and elastic modulus were observed to increase with an increase in talc content and decrease with an increase in temperature. Conversely, yield strain was observed to decrease with an increase in talc content and increase with an increase in temperature. Response Surface Methodology (RSM) was applied using the Central Composite Design (CCD) statistical experimental design approach to study the stiffness and strength of rHDPE and the effects that temperature and talc filler content have on these mechanical properties. The surfaces generated in this analysis fit the data well, with coefficients of determination greater than 0.94 for all but one property, storage modulus, which was 0.80. The evaluation of model performance revealed that the surfaces yielded good correlation and statistical significance. The results provide useful relationships that can be considered for use in practical applications involving rHDPE-talc blends, including engineering applications.
