Automatic Assembly Technology of Dense Small Screws for Flat Panel Parts

Abstract

Screw assemblies of radar are characterized by numerous densely distributed small screws of various types, rendering their manual assembly difficult and inefficient. To improve the assembly quality and efficiency, an automatic assembly system was developed. First, the position and attitude relationships among the workpiece, camera, and base coordinate systems of the manipulator were obtained using three-point location and nine-point calibration methods. Second, a visual servoing strategy is designed for guiding the manipulator such that its position can be adjusted adaptively to achieve the high-precision positioning of threaded holes. Third, a method for evaluating assembly quality is developed. The templates of angle–torque curves of various screws were produced by fitting experimental data. Furthermore, the assembly quality was determined by calculating the similarity between the angle–torque curves and templates based on the Fréchet distance. Finally, the feasibility was verified using a flat plate component with five threaded holes.

Keywords

• screw assembly
• visual servoing
• quality evaluation
• Fréchet distance