Use of dual planar jets for the reduction of flow-induced noise

Abstract

The planar jet has been proposed to reduce the flow-induced noise. However, the self-noise emission from a single planar jet is a limiting factor on the performance based characteristics of this technology. Therefore, this research paper reports an alternative dual planar jets geometry in an attempt to minimize the self-noise of the single planar jet, thus, further enhancing total noise reduction in the application. Tandem cylinders are considered as the generic bluff body, which represents the source of flow-induced noise. Tests are conducted to capture noise reduction effects when using a single planar jet geometry. Subsequently, two different configurations of the dual planar jets geometry were tested in comparison. It is observed that the dual jets geometry achieves more noise reduction when compared to the single jet. Moreover, conclusions are made on the most efficient configuration in the dual jets geometry.