Effect of High-Stress Levels on the Shear Behavior of Geosynthetic-Reinforced Marine Coral Sands

Abstract

As an important construction material, the mechanical and deformation properties of marine coral sand determine the safety and stability of related island and coastal engineering construction. The porous and easily broken characteristics of coral sand often make it difficult to meet engineering construction needs. In particular, coral sand undergoes a large amount of particle breakage under high-stress conditions, which in turn negatively affects its mechanical and deformation properties. In this study, the macro- and micro-mechanical behavior of geosynthetic-reinforced coral sand under high confining pressure was investigated and compared with unreinforced cases using the three-dimensional discrete element method (DEM), which was verified by indoor triaxial tests. The results showed that the stress–strain responses of unreinforced and reinforced coral sand under high confining pressure showed completely different trends, i.e., the hardening tendency shown in the reinforced case. Geosynthetic reinforcement can significantly inhibit the stress–strain softening and bulging deformation of coral sand under high confining pressure, thus improving the shear mechanical performance of the reinforced sample. At the microscopic scale, high confining pressure and reinforcement affected the contact force distribution pattern and stress level between particles, determining the macroscopic mechanical and deformation performance. In addition, the breakage of particles under high confining pressure was mainly affected by shear strain and reinforcement. The particle fragment distribution, particle gradation, and relative breakage index exhibited different trends at different confining pressure levels. These breakage characteristics were closely related to the deformation and stress levels of unreinforced and reinforced samples.

Keywords

• marine coral sand
• triaxial test
• DEM simulation
• high confining pressure
• shear mechanical behavior
• particle breakage