3D strain pattern in additively manufactured AlSi10Mg from digital volume correlation

Abstract

Although much research has focused on AlSi10Mg processed via laser-based powder bed fusion, the material deformation mechanisms at the microscale are still unclear. To improve the current understanding, 3D measurements of the strain field at the microstructural scale are needed to complement surface-based SEM observations. This work demonstrates that X-ray tomography combined with digital volume correlation can be used to measure the strain in the bulk of AlSi10Mg using the Si-rich particles contained in the heat-treated microstructure as markers. The method allows for measuring strains larger than 0.5 % with a spatial resolution of 35 μm and it can thus be used to study the impact of factors like porosity distribution or crystallographic texture on the material deformation and damage mechanisms.

Keywords

• Laser-based powder bed fusion
• X-ray tomography
• Digital volume correlation
• Strain
• AlSi10Mg
• Heterogeneities