Ballistic performance of titanium-based layered composites made using blended elemental powder metallurgy and hot isostatic pressing

Abstract

Metal matrix composites tiles based on Ti–6Al–4V (Ti64) alloy, reinforced with 10, 20, and 40 (vol%) of either TiC or TiB particles were made using press-and-sinter blended elemental powder metallurgy (BEPM) and then bonded together into 3-layer laminated plates using hot isostatic pressing (HIP). The laminates were ballistically tested and demonstrated superior performance. The microstructure and properties of the laminates were analyzed to determine the effect of the BEPM and HIP processing on the ballistic properties of the layered plates. The effect of porosity in sintered composites on further diffusion bonding of the plates during HIP is analyzed to understand the bonding features at the interfaces between different adjacent layers in the laminate. Exceptional ballistic performance of fabricated structures was explained by a significant reduction in the residual porosity of the BEPM products by their additional processing using HIP, which provides an unprecedented increase in the hardness of the layered composites. It is argued that the combination of the used two technologies, BEPM and HIP is principally complimentary for the materials in question with the abilities to solve the essential problems of each used individually.

Keywords

• Metal matrix composites
• Powder metallurgy
• Titanium hydride powder
• Master alloy
• Titanium carbide
• Titanium boride