Influence of Abaca Fiber Inclusion on the Unconfined Compressive Strength of Reconstituted Sandy Silts
Jorge Albuja-Sánchez,
Eduardo Alcívar,
Daniela Escobar,
Juan Montero,
Guillermo Realpe,
Andrés Muñoz,
Mateo Peñaherrera-Aguirre
Affiliations
Jorge Albuja-Sánchez
Faculty of Engineering, Laboratory of Materials Resistance, Soil Mechanics, Pavements and Geotechnics, Pontificia Universidad Católica del Ecuador (PUCE), Quito 170143, Ecuador
Eduardo Alcívar
Faculty of Engineering, Laboratory of Materials Resistance, Soil Mechanics, Pavements and Geotechnics, Pontificia Universidad Católica del Ecuador (PUCE), Quito 170143, Ecuador
Daniela Escobar
Faculty of Engineering, Laboratory of Materials Resistance, Soil Mechanics, Pavements and Geotechnics, Pontificia Universidad Católica del Ecuador (PUCE), Quito 170143, Ecuador
Juan Montero
Faculty of Engineering, Laboratory of Materials Resistance, Soil Mechanics, Pavements and Geotechnics, Pontificia Universidad Católica del Ecuador (PUCE), Quito 170143, Ecuador
Guillermo Realpe
Faculty of Engineering, Laboratory of Materials Resistance, Soil Mechanics, Pavements and Geotechnics, Pontificia Universidad Católica del Ecuador (PUCE), Quito 170143, Ecuador
Andrés Muñoz
Department of Civil Engineering, Laboratory of Soil Mechanics, Universidad Central del Ecuador, Quito 170129, Ecuador
Mateo Peñaherrera-Aguirre
College of Science, University of Arizona, Tucson, AZ 85721, USA
The present investigation determines the influence of abaca (Musa textilis) fiber inclusion on the simple compressive strength of reconstituted sandy silt specimens. For this purpose, fibers of different lengths (5, 10 and 15 mm) and quantities (0.5, 1.0, 1.5 and 2.0% of soil dry weight) are added to produce the reconstituted specimens. Subsequently, the physical and mechanical behavior of soil–fiber mixtures were evaluated through compaction and unconfined compression tests. The experimental results showed that increases in fiber content or length, or both, led to a 1235.1% increase in maximum compression stress (compared to the fiber-free soil). Compression failure occurred at a greater axial strain when 10 and 15 mm fibers were added at 1% dosage or in percentages equal to or greater than 1.5% regardless of fiber length. A series of linear mixed models identified statistically significant effects of fiber length and percentage on the level of effort and on the unitary deformation.