Lithological and petrophysical evaluation of the caprock keybeds, Asmari Reservoir of Pazanan Oil Field, Zagros, Iran

Abstract

The Pazanan oil field is located 150 km SE of ahvaz city in SW of Iran and measures 60 km long, 4-6 km wide. The caprock of this oil field were evaluated using well logs (gamma-ray and sonic logs) SEM and petrographical microscopy data. The cap rock consist of mudstone, interlayers of anhydrite and bitumens shale. Therefore, it can be classified as mudstone type. On the basis of our investigations, the Caprock can be divided in to 6 keybeds: A(Anhydrite), B(Bitumenshale & some times bitumen marls), C (mudstone with interlayers of shale & anhydrite), D (mudstone & anhydrite), E (mudstone)& F(mudstone & packstone), almost all of these units coverd by salt. Anhydrite beds show the following textures: microlitic, spherolite, porphyroblast, and granular. Anhydrite crystals indicate the occurrence of processes such as emplacement and calcitization. Sonic and gamma-ray well logs were used to determine lithological changes. The highest peak is correlated with mudstone units. Caprock depth varies from 2580m(min)-2717m(max) [northern part], 1704(min.) - 2444(max.) [central part],And 2050 (min.)- 2490 (max.) [southern part] using well drilling data. It seems that that the thickness in the southern part is less than is other part. Comparing the thicknesses of different keybeds. The maximum occurs in the c-keybeds. The sedimentar : sequence of Caprock started by mudstone, packstone and interlayers of anhydrite, followed by mudstone, anhydrite, shale-marl, as well as bitumen shale, mudstone and anhydrite and finally was overlaid by salt. Lithological variation indicate a sabkha-lacustrine environment. Therefore, the hot-wet and hot-dry climate was dominated. In some cases, Caprock thickness decreases to 6m without any gap. This thinning is related to structural deformation. Unfavorable lithologyconditions resulted is well collaps.

Keywords

• caprock
• key bed
• SEM
• bitumen shale