Preparation and adsorption properties of magnetic chitosan/sludge biochar composites for removal of Cu2+ ions

Abstract

Abstract The magnetic chitosan/sludge biochar composite adsorbent was prepared using chitosan, Fe3O4, and sludge biochar as raw materials. The composite adsorbent was able to achieve rapid solid–liquid separation under an applied magnetic field. The morphology and microstructure of the composite adsorbent were characterized by FTIR, XRD, SEM, VSM, and BET analysis. The adsorption performance of the composite adsorbent on Cu2+ was investigated through static adsorption experiments, and the effects of adsorbent dosage, initial concentration of Cu2+, initial pH of the solution, and adsorption temperature on the adsorption efficiency of Cu2+ were discussed. The results showed that chitosan and Fe3O4 were successfully loaded on sludge biochar. When the initial concentration of Cu2+ was 30 mg/L, the dosage of the magnetic chitosan/sludge biochar composite material was 0.05 g, the adsorption time was 180 min, pH was 5, and the temperature was room temperature, the maximum removal rate of Cu2+ reached 99.77%, and the maximum adsorption capacity was 55.16 mg/g. The adsorption kinetics and adsorption isotherm data fitted well with the pseudo-second-order kinetic model and Langmuir adsorption isotherm model, indicating that the adsorption process was chemisorption with monolayer coverage.