Polymers (Nov 2021)

Use of Biochar as Filler for Biocomposite Blown Films: Structure-Processing-Properties Relationships

  • Luigi Botta,
  • Rosalia Teresi,
  • Vincenzo Titone,
  • Giusi Salvaggio,
  • Francesco Paolo La Mantia,
  • Francesco Lopresti

DOI
https://doi.org/10.3390/polym13223953
Journal volume & issue
Vol. 13, no. 22
p. 3953

Abstract

Read online

In this work, biocomposite blown films based on poly(butylene adipate-co-terephthalate) (PBAT) as biopolymeric matrix and biochar (BC) as filler were successfully fabricated. The materials were subjected to a film-blowing process after being compounded in a twin-screw extruder. The preliminary investigations conducted on melt-mixed PBAT/BC composites allowed PBAT/BC 5% and PBAT/BC 10% to be identified as the most appropriate formulations to be processed via film blowing. The blown films exhibited mechanical performances adequate for possible application as film for packaging, agricultural, and compost bags. The addition of BC led to an improvement of the elastic modulus, still maintaining high values of deformation. Water contact angle measurements revealed an increase in the hydrophobic behavior of the biocomposite films compared to PBAT. Additionally, accelerated degradative tests monitored by tensile tests and spectroscopic analysis revealed that the filler induced a photo-oxidative resistance on PBAT by delaying the degradation phenomena.

Keywords