Evaluation of chemical and mechanical resistance of virgin and recycled poly (ethylene terephthalate) and poly(methylene oxide) when applied as gravel pack in petroleum wells

Abstract

AbstractNowadays more and more unexpected uses for common materials have been observed, especially when recycled polymers are concerned. In this work, the viability for application of virgin and recycled poly(ethylene terephthalate) (PETvir and PETrec, respectively) and also poly(methylene oxide) (PMO) as granular materials (gravel) for gravel packing in sand control systems for unconsolidated sandstone reservoirs was studied. Polymer samples were tested in conditions similar to those observed in Campos Basin sandstone formations, in Brazilian Southwest (70 °C and 24.1 MPa). Samples were individually confined in roller cells with chemicals used in formation treatment: hydrochloric acid, pentapotassic DTPA salt (chelant Trilon CK) and in a mixture of diesel, xylene and butyl glycol. Mass loss was measured and the changes in molecular mass verified by size exclusion chromatography (SEC). Physical shape and grain size distribution were verified by scanning electron microscopy (SEM) and sieving tests. The effects over the polymeric gravel pack confinement resistance and permeability were evaluated using an API permeability cell. PMO proved to have a limited use, whereas PETrec and PETvir samples were not significantly affected, suggesting the viability of applying that recycled polymer in gravel packing for sand control in petroleum wells.

Keywords

• poly(ethylene terephthalate)
• recycled polymer
• poly(methylene oxide)
• gravel pack
• chemical resistance
• sand control
• oil well