Design of a Laser Driver and Its Application in Gas Sensing

Abstract

A laser driver which features high stability and a graphical user-interface was designed and used in trace gas sensing. The running of the laser driver was managed by an ARM processor which was embedded with a real-time operating system (RTOS). Through clicking on the touch screen that was configured with an emWin graphical user-interface (GUI), the parameters of the driving current can be graphically set and monitored. The circuit model of the distributed feedback laser diode (DFB-LD) was introduced into a TINA-SPICE simulation to evaluate the performance of the current source. Through simulation, the potential self-oscillation can be visually predicted, and the feedback loop can be appropriately compensated. To validate the applicability, the laser driver was used for driving a carefully selected DFB-LD and was employed in wavelength modulation spectroscopy (WMS) for CH4 detection at R(3) absorption line of the 2ν3 overtone. Under the conditions of room temperature, normal pressure and an effective absorption path of 15.4 cm, repetitive experiments were conducted using gas samples, with their concentrations ranging from 400 ppm to 1%, and the detection limit derived from the signal-to-noise ratio (SNR) was 7.2 ppm. The promising result indicates the high potential of this laser driver for use in absorption spectrum-based sensing applications.

Keywords

• laser driver
• TINA-SPICE simulation
• gas sensing
• WMS