Carbon Capture Science & Technology (Jun 2024)

Plasma-catalytic CO2 methanation over Ni supported on MCM-41 catalysts: Effect of metal dispersion and process optimization

  • Shaowei Chen,
  • Tianqi Liu,
  • Jiangqi Niu,
  • Jianguo Huang,
  • Xinsheng Peng,
  • Huanyu Zhou,
  • Huanhao Chen,
  • Xiaolei Fan

Journal volume & issue
Vol. 11
p. 100194

Abstract

Read online

Catalytic carbon dioxide (CO2) conversion technologies can be important components in carbon capture, storage and utilization for CO2 mitigation and possible future economic activity and have gained significant attention globally in past decades. Electrified non-thermal plasma (NTP) catalysis enables CO2 hydrogenation into value-added chemicals under mild conditions. If the hybrid process is coupled with renewable energy and green hydrogen, it can be the promising solution to address the energy and carbon emission challenges. To enhance the energy efficiency of NTP-catalytic systems, bespoke catalyst design and process optimization are necessary. Here, using Ni catalysts supported on mesoporous MCM-41 and NTP-catalytic CO2 methanation as the model systems, the effects of Ni metal dispersion, argon (Ar) addition and residence time on the NTP catalysis were also studied. The findings show that (i) increased metal dispersion alone did not lead to significant enhancement in the performance of NTP catalysis (e.g., CH4 production rate: 31.4 × 10−5 mol/(s·gNi) for 42.6 % Ni dispersion vs. 26.8 × 10−5 mol/(s·gNi) for 25.1 % dispersion), (ii) Ar addition to the system led to the decreased methane production rate (e.g., CH4 selectivity decreased by ∼19 % due to the increase in Ar addition to the system from 5 to 50 mL/min), and (iii) optimization of the residence time could improve the performance of NTP-catalytic CO2 methanation (i.e., an extension of the residence time to 0.69 s resulted in the higher CO2 conversion of 72.7 % and CH4 selectivity of 95.9 % at 9.6 kV than that at 0.49 s and 11 kV).

Keywords