Enhanced Productivity of Bottom-Blowing Copper-Smelting Process Using Plume Eye

Abstract

Bottom-blowing copper smelting is a bath smelting technology recently developed in China. It has the advantages of good adaptability of raw materials, high oxygen utilization and thermal efficiency, and flexible production capacity. Plume eye is a unique phenomenon observed in the bottom-blowing copper-smelting furnace where the slag on the surface of the bath is pushed away by the high-pressure gas injected from the bottom. The existence of plume eye was first confirmed by analyzing the quenched industrial samples collected above the gas injection area and then investigated by laboratory water model experiments. Combining the plant operating data and the smelting mechanism of the copper concentrate, the role of the plume eye in bottom-blowing-enhanced smelting is analyzed. It reveals that the direct dissolution of copper concentrate as a low-grade matte into the molten matte can significantly accelerate the reactions between the concentrate and oxygen. The productivity of the bottom-blowing furnace is therefore increased as a result. The effects of the gas flow rate and thickness of the matte and of the slag layer on the diameter of the plume eye were studied using water-model experiments. It was found that increasing the gas flow and the thickness of the matte and reducing the thickness of the slag can increase the diameter of the plume eye. This work is of great significance for further understanding the copper bottom-blowing smelting technology and optimizing industrial operations.

Keywords

• copper metallurgy
• plume eye
• bottom-blowing copper smelting
• water model