Photonics (Jun 2024)

Simulation and Analysis of a Near-Perfect Solar Absorber Based on SiO<sub>2</sub>-Ti Cascade Optical Cavity

  • Peng Chen,
  • Yingting Yi,
  • Qianju Song,
  • Zao Yi,
  • Yougen Yi,
  • Shubo Cheng,
  • Jianguo Zhang,
  • Chaojun Tang,
  • Tangyou Sun,
  • Qingdong Zeng

DOI
https://doi.org/10.3390/photonics11070604
Journal volume & issue
Vol. 11, no. 7
p. 604

Abstract

Read online

The main development direction for current solar technology is to improve absorption efficiency and stability. To bridge this gap, we design in this paper a structure consisting of two multilayer disc stacks of different radii, one topped by a TiO2 disc and the other by a cascade disc stack composed of SiO2-Ti, for use in thermal emitters and solar absorbers. The innovation of our work is the exploitation of multiple Fabry–Perot resonances in SiO2-Ti cascade optical cavities to develop absorber bandwidths while investigating it in the field of thermal emission and many aspects affecting the efficiency of the absorber. The finite difference time domain method (FDTD) results show absorption averages as high as 96.68% with an absorption bandwidth of 2445 nm (A > 90%) at 280 nm–3000 nm solar incidence and even higher weighted averages as high as 98.48% at 1.5 solar air mass (AM) illumination. In order to investigate the physical mechanisms of our designed absorber in a high absorption state, we analyzed the electric field distributions of its four absorption peaks and concluded that its high absorption is mainly caused by the coupling of multiple Fabry–Perot resonance modes in the cascaded optical cavity. While considering this high efficiency, we also investigated the effect of complex environments such as extreme high temperatures and changes in the angle of incidence of the absorber, and the results show that the thermal radiation efficiency of the emitter is 96.79% at an operating temperature of 1700 K, which is higher than its thermal radiation efficiency of 96.38% at an operating temperature of 1500 K, which is a perfect result. On the other hand, we conclude that the designed structure is independent of polarization, while the absorber still has 88.22% absorption at incidence angles of up to 60°, both in transverse electric (TE) and transverse magnetic (TM) modes. The results of this study can help improve the performance of future solar absorbers and expand their application areas.

Keywords