Modeling of Aerodynamic Separation of Preliminarily Stratified Grain Mixture in Vertical Pneumatic Separation Duct

Abstract

The productivity of most grain cleaning machines seems to be directly related to the efficiency of vertical pneumatic separation ducts. Nevertheless, improvement is accompanied by an increase in the load of the vertical duct, the design of which is limited by the width of the grain cleaning machines. This requires an increase in the thickness of the layer of grain mixture that enters the working area of the duct, which significantly worsens the conditions of separation of its components under the action of airflow. Particles of light impurities are unable to separate due to their retention by the grain medium. This reduces the quality of cleaning and requires appropriate scientific and technical solutions. The application of preliminary stratification of the granular mixture while increasing the concentration of light impurities in the top layer of the mixture seems to be a prospective method. The positive effect of the previous stratification on the intensity of redistribution of light impurity particles in the working zone has been theoretically considered and experimentally confirmed. Mathematical models were obtained to determine the trajectory of discussed particles, taking into account the previous stratification of mixtures, and the corresponding dependences were established. The influence of the initial coordination of the introduction of the particles of lightweight impurities, their sizes and densities, and technological and structural parameters of operation of the pneumatic separation duct were taken into account in the studies. The intensification of the process of cleaning grain from lightweight impurities in the working zones of pneumatic separation ducts of grain cleaning machines is theoretically substantiated.

Keywords

• cleaning processes
• pneumatic separating duct
• grain mixtures
• lightweight impurities