Engenharia Agrícola (Feb 2024)

CALIBRATION AND OPTIMIZATION OF DISCRETE ELEMENT PARAMETERS FOR COATED COTTON SEEDS

  • Zenglu Shi,
  • Meijing Wang,
  • Xuejun Zhang,
  • Jinpeng Cheng,
  • Dengming Lu

DOI
https://doi.org/10.1590/1809-4430-eng.agric.v44e20230085/2024
Journal volume & issue
Vol. 44

Abstract

Read online Read online

ABSTRACT The geometric characteristics, physical parameters and contact parameters of coated cotton seeds were obtained through theoretical analysis and experimental measurements. A discrete element model reflecting the intrinsic parameters of cotton seeds was established, the contact parameters of coated cotton seeds were calibrated using Discrete Element Method (DEM), and the significant factors affecting the stacking angle were screened using the Plackett-Burman method. The optimal ranges of the parameters were determined by the steepest ascent method, and a second-order regression model of the stacking angle and significant parameters was established by a central composite design. The following optimal values were obtained for cotton seeds: collision recovery (0.38), static friction (0.57) and rolling friction (0.19) coefficients. The average value of the stacking angle obtained by simulations with the best combination of parameters was 30.52°, the result of the simulation test was 30.91°, and the relative error was 1.278%. It is shown that the discrete element particle model and calibration parameters of cotton seed are closer to the actual situation, which can provide theoretical reference for analyzing the precise seeding of cotton seed and optimizing the structural parameters of seed disperser.

Keywords