Utilização de madeiras de Eucalyptus grandis E Eucalyptus dunnii para produção de painéis de partículas orientadas – OSB

Abstract

This study was developed to evaluate the feasibility of OSB manufacturing using woods of Eucalyptus grandis and Eucalyptus dunnii. Boards with nominal density of 0,70 g/cm³ and 1,0 g/cm³ were manufactured in laboratory, using 100% of wood particles from Pinus taeda, Eucalyptus grandis and Eucalyptus dunnii, and mixtures of 50% of Pinus taeda in the internal layer of the board, with 50% of Eucalyptus grandis and 50% of Eucalyptus dunnii. The boards of Eucalyptus grandis with density of 0,70 g/cm³, as standard board density, showed the values of properties compatible with the requirements of the Canadian and European Standards and also in relation of boards manufactured from Pinus taeda. The results of the mechanical properties showed an increase in the MOE and MOR in static bending with the increase in the board density, opening the possibility to use the high density OSB for applications requiring higher strength. The results of this research indicate that wood of Eucalyptus grandis can be used as alternative specie to OSB manufacturing in the Brazil.