Comparison of grain structure models for wave propagation analysis in centrifugally cast stainless steel

Abstract

Centrifugally cast stainless steel (CASS) is widely used in primary coolant piping of pressurized water reactor plants because of its high corrosion resistance and high strength. An in-service inspection based on ultrasonic testing (UT) has to be conducted for weld joints of primary coolant piping on the basis of JSME Rules on Fitness-forService for Nuclear Power Plants. However, it is difficult to detect and size flaws in CASS components with high accuracy because of the following reasons: Ultrasonic waves are scattered and attenuated due to coarse grains, and anisotropic and heterogeneous properties in CASS lead to ultrasonic beam skewing. Numerical simulations are useful and reasonable ways for better understanding the ultrasonic wave propagation behavior in CASS. To effectively achieve this, the simulation model should include a three-dimensional (3D) grain structure. In this study, we modeled three kinds of the solidification grain structures of centrifugally CASS. One is obtained by using a cellular automaton method, another consists of many hexagonal columns with the same dimensions, and the other is transversely isotropic material. Then these structures were fed into an explicit finite element model for simulating wave propagation and the simulated results were compared with those measured by a laser Doppler vibrometer. Through the comparison, we investigated the applicability of these three kinds of solidification grain structure models to simulation for wave propagation.