Electrical engineering & Electromechanics (Oct 2024)

An application of multi-magnetic circular planar spiral relay to improve the performance of wireless power transfer system

  • M. Irwanto,
  • L. K. W. Kita

DOI
https://doi.org/10.20998/2074-272X.2024.6.03
Journal volume & issue
Vol. 2024, no. 6
pp. 19 – 26

Abstract

Read online

Introduction. The system of delivering electricity without wires is known as wireless power transfer (WPT). The WPT system has been extensively used in a number of industries, health, telecommunications, and transportation. However, the distance between the transmitter and receiver coils has a significant impact on its efficiency. Lower power can be generated between coils the farther apart they are, and vice versa. The novelty of the proposed work is innovative in that it develops a multi-magnetic circular planar spiral relay to improve the WPT system’s performance and designs circular planar spiral coils to achieve an appropriate inductance value for the 5 kHz matching frequency. The goal of paper is to create a circular planar spiral coil with an appropriate inductance value for the 5 kHz matching frequency. Methods. The transmitter circuit, receiver circuit, and DC voltage source are parts of the WPT system. The inverter circuit uses the inductive coupling technique to transform the DC power source into AC voltage on the transmitter coil. The suggested coil is additionally employed as a multi-magnetic circular planar spiral relay in order to increase the mutual inductance between the receiver and transmitter coils. Results. To monitor the power improvement that results from adding a multi-magnetic relay to the system, the transmitter coil, receiver coil, and multi-magnetic relay are positioned at specific distances from each other. With Vdc = 30 V and dtr = 21 cm, the power received at the receiver coil can therefore be improved by up to 67 %. Practical value. The multi-magnetic circular planar spiral relay applied in the WPT system has been investigated in an experimental study and it can be applied for DC load. References 26, table 1, figure 18.

Keywords