Resistance of Particleboards Made from Fast-Growing Wood Species to Subterranean Termite Attack

Abstract

Laboratory-made particleboards were tested for their resistance to subterranean termite, <em>Coptotermes curvignathus </em>Holmgren (Order Isoptera, Family Termitidae) by Indonesian standard SNI 01.7207–2006, during four weeks and at the end of the test their mass loss percentage and feeding rate were determined. Particleboards consisted of: jabon (<em>Anthocephalus cadamba</em>, Family Rubiacea) with a density of 0.41 g/cm³; sungkai (<em>Peronema canescens</em>, Family Verbenaceae) with a density of 0.46 g/cm³; mangium (<em>Acacia mangium</em>, Family Rhamnaceae) with a density of 0.60 g/cm³ separately and the three species mixture at a rate of 1:1:1. Densities of the boards were targetted at 0.60 g/cm³ and 0.80 g/cm³ by using 12% urea formaldehyde as binder with 2% paraffin as additive based on oven dry wood particle weight. The hand-formed mats and hot-pressing at 130 °C and 2.45 MPa for 10 min were applied. The results showed that particleboards density did not affect mass loss and feeding rate, but the particleboards made from higher density wood resulted in higher resistance to subterranean termite attack. The most resistant particleboards were made of magium, followed by sungkai, mixed species, and jabon.

Keywords

• particleboard
• fast growing species
• subterranean termite
• mass loss
• feeding rate