Minerals (Oct 2022)
Artificial Thermal Quenching and Salt Crystallization Weathering Processes for the Assessment of Long-Term Degradation Characteristics of Some Sedimentary Rocks, Egypt
Abstract
This research aims at investigating the deterioration of limestone rocks due to the influences of thermal quenching and salt crystallization weathering tests and predicting their long-term durability. Therefore, six types of limestones were quarried from different provinces of Egypt and subjected to 50 cycles of thermal quenching and 25 cycles of salt crystallization weathering processes. The porosity, Schmidt hammer rebound hardness, ultrasound pulse velocity, Brazilian tensile strength, and uniaxial compression strength were determined before and after weathering processes. In addition, the mathematical decay function model was developed to evaluate the degradation rate of samples against weathering processes. Results proved that the cyclic salt crystallization deteriorates the physico-mechanical characteristics of the studied limestone more strongly than the thermal quenching cycles do. The decay constant and half-life indexes obtained here indicate that the degradation rate differs for various limestone specimens under thermal and salt weathering processes. This model also showed that the deterioration rate of the studied rocks was higher during cyclic salt crystallization in comparison with thermal quenching. Therefore, the rock degradation rate and or long-term durability under cyclic thermal and salt processes can be estimated accurately. These results show that the studied limestones can be used as building stones in regions exposed to frequent cyclic thermal and salty weathering conditions for long periods without degradation. However, partial attention should be given to LSG limestone rocks characterized by increased porosity and water absorption characteristics.
Keywords