Remote sensing estimation of water storage in the channel-type reservoirs under unknown underwater topographic data

Abstract

Dynamic monitoring of reservoir water storage in arid areas is important for water resources assessment, hydroelectric power generation and agricultural irrigation. However, existing reservoir water calculation methods often rely on in-situ measurements, which limits their application in data scarce regionals and for regional scale analyses. Hence, we propose a novel method to estimate the water storage of channel-type reservoirs in arid areas with unknown underwater topography, with the Bosten Lake watershed serving as a case study site. The method first divides reservoirs into three types based on their upstream and downstream topography: V-shape, U-shape, and flat-shape reservoirs. For the V-shape and U-shape reservoirs, the underwater topography was produced by fitting a linear fit and a polynomial based on the observed elevation above the water surface, respectively. Meanwhile, extrapolation or splining techniques were used to derive the underwater topography for the flat-shape reservoir. The proposed methods are able to measure the underwater topography of the Bosten Lake watershed accurately, with the coefficient of determination (R2) values of 0.83, 0.75 and 0.61 for the V-shape, U-shape, and flat-shape reservoirs, respectively. In addition, the fit of the in-situ water depths of unmanned ships was matched to the simulated water depths for the Xiaoshankou and Bayi reservoirs, yielding R2 values of 0.91 and 0.83 as well as root mean square error (RMSE) of 1.27 m and 1.18 m, respectively. Our approach may be applied in other areas where river underwater topography data is lacking or sparse, and provide important basis for rational water resources management in these areas.

Keywords

• Remote sensing
• Channel‐Type Reservoirs
• Underwater topography
• Water storage estimate