Design, Implementation, and Deployment of Modular Battery Management System for IIoT-Based Applications

Henar Mike O. Canilang; Angela C. Caliwag; Wansu Lim

doi:10.1109/ACCESS.2022.3214177

IEEE Access (Jan 2022)

Design, Implementation, and Deployment of Modular Battery Management System for IIoT-Based Applications

Henar Mike O. Canilang,
Angela C. Caliwag,
Wansu Lim

Affiliations

Henar Mike O. Canilang: ORCiD; Electronics Engineering Department (Department of Aeronautics, Mechanical and Electronic Convergence Engineering), Kumoh National Institute of Technology, Gumi, South Korea
Angela C. Caliwag: ORCiD; Electronics Engineering Department (Department of Aeronautics, Mechanical and Electronic Convergence Engineering), Kumoh National Institute of Technology, Gumi, South Korea
Wansu Lim: ORCiD; Electronics Engineering Department (Department of Aeronautics, Mechanical and Electronic Convergence Engineering), Kumoh National Institute of Technology, Gumi, South Korea

DOI: https://doi.org/10.1109/ACCESS.2022.3214177
Journal volume & issue: Vol. 10
pp. 109008 – 109028

Abstract

Read online

This paper proposes design and implementation of a battery management system (BMS) for the industrial internet of things (IIoT) enabled applications. The hardware and software development of this BMS is briefly presented in this paper. In terms of hardware development, the presented BMS have modular topology and has 1) high fault tolerance and 2) has exceptionally flexible deployment owing to its topology having multiple local management units (LMUs) connected to a central management unit (CMU). This hardware design approach aims to address the overall design efficiency and cost trade-off of BMS deployment. The hardware design efficiency is tested using actual deployment. In terms of fault tolerance using 1 – 3 LMUs at fault, the voltage monitoring accuracy is maintained for each LMUs. An average of 0.00017 V, 0.0008 V and 0.001 V voltage difference is yielded for 1, 2, and 3 modules at fault respectively. Additionally, core BMS sub-circuit is tested to verify hardware design efficiency such as the DC-to-DC converter which yielded 92.74%. Furthermore, the CMU is integrated with a wireless communication circuit that enables IIoT-based applications such as the emerging edge-based, and a plethora of intelligent deployment. In terms of software, the presented BMS aims to realize state-of-the-art processing through IIoT based approach. For software testing and verification, the BMS is deployed to an unmanned ground vehicle (UGV). The signal stability is tested for UGV based application at a 3500s deployment time whereas an average of 0.0010V voltage difference is yielded. This is verified using time markers which is further analyzed using software-based signal processing and acquisition simulation. Concisely, the proposed BMS aims to converge IIoT applications to its actual deployment. The proposed BMS is designed, implemented, and successfully deployed to test its viability both in the simulation platform and actual deployment.

Published in IEEE Access

ISSN: 2169-3536 (Online)
Publisher: IEEE
Country of publisher: United States
LCC subjects: Technology: Electrical engineering. Electronics. Nuclear engineering
Website: https://ieeexplore.ieee.org/xpl/RecentIssue.jsp?punumber=6287639

About the journal

Abstract

Keywords