Heterogeneous microgrids: Centralized control strategy with distributed grid-forming converters

Abstract

Advanced microgrid (MG) is a likely model for reaching the goal of 100% renewable grid. A complete advanced MG control must steer the power flow in grid-connected mode; regulate voltage/frequency in islanded mode; and perform power sharing among distributed energy resources (DERs) in both modes. Power-based control (PBC) is a well-known centralized control capable of achieving these three targets. A serious disadvantage of usual MG structures using PBC approach is the existence of a single centralized grid-forming converter to form the islanded MG. Centralized grid-forming converter is a single point of failure, which reduces the capability of the MG expansion, and it is an expensive element for the MG. This paper proposes a MG control strategy using an improved centralized control together with a droop-based power-loop in distributed voltage-controlled mode (VCM) converters to allow the MG to operate in both modes, without a centralized grid-forming converter and critical islanding detection. Moreover, the new approach considers single- and three-phase DERs, controlled in VCM or current-controlled mode, and DERs with self-imposed limits, characterizing a heterogeneous MG. Real-time hardware-in-the-loop setup is used to test the proposed control strategy in several operating conditions considering ten heterogeneous DERs. Results show grid power flow control, power sharing, unbalance compensation, voltage/frequency restoration, and smooth transitioning between operating modes without critical islanding detection.

Keywords

• Current-controlled converters
• Centralized control
• Grid-forming converters
• Microgrids
• Smooth transition
• Voltage-controlled converters