Effect of Stagger on Low-Speed Performance of Busemann Biplane Airfoil

Abstract

In this study, the low-speed performances of the Busemann biplane were clarified, focusing on the relative contributions of the upper and lower elements to the total aerodynamic characteristics of the biplane. Also, the effects of the staggered biplane, which changes the horizontal distance between two wings in a biplane configuration, were investigated by balance measurements and numerical simulations. The flow velocity was 15 m/s, and the Reynolds number based on the airfoil chord length was 2.1 × 105. In the tests of the integrated biplane wing, the attack angles of the wing elements were varied by a balance system and turntable, which were set in the wind tunnel sidewall. The results show that the lower element generated most of the lift and drag of the Busemann biplane (or the baseline biplane model with no stagger) at high angles of attack. At angles above 20 deg, the contribution of the lower element to total aerodynamic characteristics is almost constant, with 95% of the total lift and 88% of the total drag. The total lift and drag of the baseline model were smaller than the sum of the individual elements that were treated as a single configuration. The increments of lift and drag due to the stagger effects were confirmed, especially at high angles of attack. When the stagger value increases, the high-pressure area near the leading edge of the lower surface of the upper element also increases, which increases the lift and drag of the up-per element. This is the main reason for the increments of total lift and drag of the biplane model. The stagger effects also prevented the leading-edge separation of the lower element in the biplane configuration and increased the lift slopes of the biplane model.

Keywords

• Busemann biplane
• stagger
• balance measurement
• aerodynamics
• interference ratio