Epoxy and polyvinylchloride materials with fillers derived from rice waste

Gotlib Elena; Sokolova Alla; Zenitova Lyubov; Galimov Engel; Valeeva Alina

doi:10.1051/e3sconf/202453301001

E3S Web of Conferences (Jan 2024)

Epoxy and polyvinylchloride materials with fillers derived from rice waste

Gotlib Elena,
Sokolova Alla,
Zenitova Lyubov,
Galimov Engel,
Valeeva Alina

Affiliations

Gotlib Elena: Kazan National Research Technological University, Department of Synthetic Resin Technologies
Sokolova Alla: National Research Moscow State University of Civil Engineering, Department of Material Science
Zenitova Lyubov: Kazan National Research Technological University, Department of Synthetic Resin Technologies
Galimov Engel: Kazan National Research Technical University named after A. N. Tupolev – KAI, Department of Material Science
Valeeva Alina: Kazan National Research Technical University named after A. N. Tupolev – KAI, Department of Material Science

DOI: https://doi.org/10.1051/e3sconf/202453301001
Journal volume & issue: Vol. 533
p. 01001

Abstract

Read online

The article is dedicated to the study of silicate fillers on the base of rice production waste and their perspective application in epoxy and polyvinylchloride composite materials. The authors evaluate the impact of phase and granulometric composition, porosity of fillers, the temperature of their obtaining on modifying effect. The comparative analysis of obtained fillers with industrial Aerosil and fully amorphous silicon dioxide is implemented. The effectiveness of application of rice husk ash burnt at 500°C is proven from technical, economic and environmental aspects.

Published in E3S Web of Conferences

ISSN: 2267-1242 (Online)
Publisher: EDP Sciences
Country of publisher: France
LCC subjects: Geography. Anthropology. Recreation: Environmental sciences
Website: http://www.e3s-conferences.org/

About the journal