Rectification and converter control of the FPSLGs for energy storage applications

Abstract

Abstract This article presents two power converters with controllers attached to the Free‐Piston Stirling Linear Generator (FPSLG) and energy storage system (ESS). The rectifier uses hysteresis‐SVPWM current regulation and CB‐SPWM, while the buck‐boost converter utilizes the dual‐loop PI control method. The storage battery receives energy from a linear‐generator with a rectifier and converter. The FPSE and linear motors in the FPSLG convert thermal to electrical energy. A two‐level electrical energy conversion technique using a three‐phase AC signal to DC and DC‐DC converter has been devised to reduce output electrical energy oscillation as well as stabilize the generating system's DC power. Initially, the FPSE's nonlinear model and the three‐phase permanent magnet linear‐motor's linear mathematical model were created and followed by the ESS and control mechanism simulation. The simulation shows that the ESS system and control approach can give stable power to the storage battery using linear‐generator power. The PR controller replaces the PI controller in the position loop to improve frequency and displacement tracing. The control system design was simulated in MATLAB and the topology's feasibility and correctness were confirmed. Comparative analysis shows that, rectifier uses the H‐SVPWM's unity power factor of AC and stability controllability of the DC‐side voltage is better than the CB‐SPWM approach.

Keywords

• AC‐DC rectifier
• DC‐DC converter
• energy storage
• FPSLG
• hysteresis‐SVPWM