Numerical Simulation on the Leakage-Induced Collapse of Segmental Tunnels

Abstract

Sudden leakage during tunnel construction poses a great threat to the safety of the tunnel. There are relatively few studies on the mechanism of structural collapse induced by tunnel leakage, so it is difficult to propose effective control measures. To solve this problem, a coupled fluid–solid strata analysis model and a nonlinear FEM tunnel model were established based on model test results to analyze the mechanism of tunnel collapse. The following conclusions were drawn: (1) A DEM-based coupled fluid–solid model combined with a nonlinear FEM tunnel model can effectively simulate the physical process of tunnel collapse. (2) The mechanism of tunnel leakage-induced strata response is the continuous destabilization and reappearance of the soil arching effect, which restricts the erosion of the soil and results in macroscopic soil caves, and finally leads to the impact load of the destabilized soil. (3) The process of the tunnel structure collapse is as follows: firstly, a large deformation of the tunnel structure is caused by the redistribution of external loads generated by the earth arching effect; then, due to the multiple impact loads from the destabilization of the soil, plastic hinges are generated at the tunnel joints, and the tunnel collapses.

Keywords

• tunnel collapse
• coupled fluid–solid simulation
• model test
• soil arching effect
• impact load