EURASIP Journal on Wireless Communications and Networking (Jun 2024)

Highly compact UWB-MIMO antenna with sharp multi-stop band characteristics

  • Preeti Pannu

DOI
https://doi.org/10.1186/s13638-024-02369-1
Journal volume & issue
Vol. 2024, no. 1
pp. 1 – 14

Abstract

Read online

Abstract With multi-band rejection characteristics, a new low-profile antenna of size 34 × 34 mm2 is conferred in this article. It consists of quad identical monopole elements (originated orthogonally), contributing ultra-wideband characteristics in the system. The single unit of the proposed design consists of a modified spinning-top shape radiator (MSTSR), excited by a tapered microstrip line feed (TMLF) and semi-circular ground. An excellent bandwidth of 3–12.9 GHz (where S11 < − 10 dB) is obtained at each port. By inserting the structure of four spiral coils, a sharp notch ranging from 7.9 to 8.5 GHz is achieved to filter the X-band satellite communication uplink. In addition, a circular spiral slot in the radiator near the ground plane creates a stop band at 7.35–7.565 GHz band (satellite communication downlink band). Furthermore, symmetrical rectangular trapezoid resonators and inverted symmetrical rectangular trapezoid structures near the feed line are responsible for the elimination of interferences at 5.5 GHz lower WLAN and 3.5 GHz WiMAX respectively. The FR-4 substrate used for the UWB-MIMO design fabrication process and fabricated results are found in good match with the simulated results. Also, the design provides good performance metrics such as total active reflection coefficient, diversity gain, channel capacity loss, isolation, and envelope correlation coefficient.

Keywords