Disposable Sensor with Copper-Loaded Carbon Nanospheres for the Simultaneous Determination of Dopamine and Melatonin

Abstract

A novel electrochemical sensor based on Cu-loaded carbon nanospheres (Cu–CNSs) was designed and fabricated. Initially, the CNSs were synthesized using a natural or inexpensive carbon source (dark brown sugar), and Cu was loaded to enhance the electrocatalytic properties of the material. Subsequently, the synthesized Cu–CNSs were modified onto a screen-printed carbon electrode (SPCE), termed Cu–CNS/SPCE, to simultaneously detect the biomarkers dopamine (DA) and melatonin (MT) through differential pulse voltammetry. The surface characterization of the Cu–CNSs confirmed the formation of carbon spheres and Cu nanoparticles covering the spheres. Electrochemical studies showed that the Cu–CNS/SPCE had a high selectivity and sensitivity toward DA and MT, with a significant peak separation of 0.502 V. The two linear ranges of DA were 0.125–20 μM and 20–100 μM and the linear range of MT was 1.0–100 μM, with corresponding detection limits of 0.34 μM and 0.33 μM (S/N = 3), respectively. The quantification limits for DA and MT were 2.19 and 1.09 μM (S/N = 10), respectively. The sensor performance is attributed to the high conductivity and large, electrochemically active surface area of the Cu–CNS. In human serum samples, the Cu–CNS/SPCE exhibited good selectivity and satisfactory reproducibility for the simultaneous determination of DA and MT.

Keywords

• electrochemical sensor
• copper-loaded carbon nanospheres
• natural or inexpensive carbon source
• screen-printed carbon electrode
• dopamine
• melatonin