Agriculture (Jun 2022)

Friction and Wear Properties of Wheat Straw Powder Third Body on Steel-Steel Friction Pair

  • Chenglong Lian,
  • Wei Zhao,
  • Shumei Wang,
  • Peng Zhang,
  • Xiaoying Dong,
  • Yongfeng Li

DOI
https://doi.org/10.3390/agriculture12060882
Journal volume & issue
Vol. 12, no. 6
p. 882

Abstract

Read online

Third body plant fibers have an important influence on the friction and wear properties of metal friction pairs. In this study, wheat straw powder with different particle sizes was prepared, and a pin-on-disk friction tester was employed to evaluate the friction and wear properties of the wheat straw powder third body on steel friction pairs under various conditions. The results show that the straw powder played an isolation role in the steel–steel friction pair, which reduced the contact area between the pin and the disc and thus reduced the friction coefficient. Compared with the large particle size powder, the small particle size powder became embedded in the friction interface or in the groove caused by wear, buffered the friction stress, and reduced the friction coefficient and wear. When lubricants such as lubricating oil or lubricating grease were added, the friction coefficient was significantly reduced. Under the influence of lubricant, the particle size of straw powder had no significant effect on the wear. The results of this study can provide a reference for the third body friction and wear properties of straw powder and the design of friction pairs for metal parts.

Keywords