Journal of Manufacturing and Materials Processing (Oct 2022)

SLA Resins Modification by Liquid Mixing with Ceramic Powders Aiming at Mechanical Property and Thermal Stability Enhancement for Rapid Tooling Applications

  • Anna Karatza,
  • Panagiotis Zouboulis,
  • Iakovos Gavalas,
  • Dionisis Semitekolos,
  • Artemis Kontiza,
  • Melpo Karamitrou,
  • Elias P. Koumoulos,
  • Costas Charitidis

DOI
https://doi.org/10.3390/jmmp6060129
Journal volume & issue
Vol. 6, no. 6
p. 129

Abstract

Read online

Stereolithography (SL) additive manufacturing process provides increased dimensional precision, smooth surface finish and printing resolution range in the order of magnitude of 100 μm, allowing to obtain intricate 3D geometries. The incorporation of ceramic-based inclusions within liquid resins enhances the thermal and mechanical properties of the final 3D printed component while improving the surface finishing of the final parts; in this way, it expands the range of process applications and reduces the post-processing steps. The proposed approach investigates the bulk modification of commercial SLA resins mixed with ceramic powders of Al2O3 (grain size 1–10 μm) and SiO2 (grain size 55–75 nm) aiming to improve 3D printed parts performance in terms of mechanical properties, dimensional stability and surface finishing compared with pure, unmodified resins. The produced materials were used for the development of inserts for injection moulding and were examined for their performance during the injection moulding process. The addition of particles in the nano- and micro-range is being employed to improve parts performance for rapid tooling applications whilst maintaining 3D printing accuracy, thermal and mechanical properties as well as achieving a smooth surface finishing compared with unmodified resins.

Keywords