Solids (Feb 2023)
Second-Order Collocation-Based Mixed FEM for Flexoelectric Solids
Abstract
Flexoelectricity is an electromechanical coupling between the electric field and the mechanical strain gradient, as well as between the mechanical strains and the electric field gradient, observed in all dielectric materials, including those with centrosymmetry. Flexoelectricity demands C1-continuity for straightforward numerical implementation as the governing equations in the gradient theory are fourth-order partial differential equations. In this work, an alternative collocation-based mixed finite element method for direct flexoelectricity is used, for which a newly developed quadratic element with a high capability of capturing gradients is introduced. In the collocation method, mechanical strains and electric field through independently assumed polynomials are collocated with the mechanical strains and electric field derived from the mechanical displacements and electric potential at collocation points inside a finite element. The mechanical strain gradient and electric field are obtained by taking the directional derivative of the independent mechanical strain and electric field gradients. However, an earlier proposed linear element is unable to capture all mechanical strain gradient components and, thus, simulate flexoelectricity correctly. This problem is solved in the present work by using quadratic shape functions for the mechanical displacements and electric potential with fewer degrees of freedom than the traditional mixed finite element method. A Fortran user-element code is developed by the authors: first, for the linear and, after that, for the quadratic element. After verifying the linear element with numerical results from the literature, both linear and quadratic elements’ behaviors are tested for different problems. It is shown that the proposed second-order collocation-based mixed FEM can capture the flexoelectric behavior better compared to the existing linear formulations.
Keywords
