Lightweight cost-effective hybrid materials for energy absorption applications

Abstract

Abstract The present paper experimentally explores the influence of the fiber hybridization and layering sequence on crashworthiness behavior and deformation history of polymer/metal thin-walled pipes. Jute (J)/glass (G) reinforced epoxy over wrapped aluminum (Al) pipes were prepared via hand wet wrapping then subjected to axial quasi-static compressive loads. The load versus displacement plots and crashing indicators, i.e. peak crushing load ( $${\mathrm{F}}_{\mathrm{ip}}$$ F ip ), mean crushing load ( $${\mathrm{F}}_{\mathrm{m}}$$ F m ), total energy absorption ( $$\mathrm{U})$$ U ) , specific energy absorption $$\left(\mathrm{SEA}\right)$$ SEA , and crush force efficiency $$\left(\mathrm{CFE}\right)$$ CFE were determined. Experimental results revealed that the maximum $$\left(\mathrm{SEA}\right)$$ SEA was recorded for Al/2J/4G/2J pipe with a value of about 42.92 kJ/g, with an enhancement of 20.56% in $$\left(\mathrm{SEA}\right)$$ SEA compared with pure Al-pipes. Al/2J/4G/2J specimens display the maximum ( $$\mathrm{U})$$ U ) , $$\left(\mathrm{SEA}\right)$$ SEA , and $$\left(\mathrm{CFE}\right)$$ CFE and could be employed as energy absorbing members in automobiles.