Surface Roughness Effects on Flows Past Two Circular Cylinders in Tandem Arrangement at Co-Shedding Regime

Abstract

This paper contributes by investigating surface roughness effects on temporal history of aerodynamic loads and vortex shedding frequency of two circular cylinders in tandem arrangement. The pair of cylinders is immovable; of equal outer diameter, D; and its geometry is defined by the dimensionless center-to-center pitch ratio, L/D. Thus, a distance of L/D = 4.5 is chosen to characterize the co-shedding regime, where the two shear layers of opposite signals, originated from each cylinder surface, interact generating counter-rotating vortical structures. A subcritical Reynolds number of Re = 6.5 × 104 is chosen for the test cases, which allows some comparisons with experimental results without roughness effects available in the literature. Two relative roughness heights are adopted, nominally ε/D = 0.001 and 0.007, aiming to capture the sensitivity of the applied numerical approach. Recent numerical results published in the literature have reported that the present two-dimensional model of surface roughness effects is able to capture both drag reduction and full cessation of vortex shedding for an immovable cylinder near a moving ground. That roughness model was successfully blended with a Lagrangian vortex method using sub-grid turbulence modeling. Overall, the effects of relative roughness heights on flows past two cylinders reveal changing of behavior of the vorticity dynamics, in which drag reduction, intermittence of vortex shedding, and wake destruction are identified under certain roughness effects. This kind of study is very useful for engineering conservative designs. The work is also motivated by scarcity of results previous discussing flows past cylinders in cross flow with surface roughness effects.

Keywords

• roughness model
• base pressure
• drag reduction
• intermittence
• discrete vortex method