Modification of natural clinoptilolite for the nitrate removal from water media

Abstract

The natural zeolitic tuff from the Zlatokop mine (Vranjska Banja deposit) has been investigated as a starting material for obtaining a low cost adsorbent for the removal of nitrate from water media. The tuff riched with zeolite - clinoptilolite was modified by simple procedures by several oxides: iron(III), manganese(IV) and magnesium in order to make clinoptilolite surface accessible for binding the nitrate ions. The obtained oxide-modified zeolite samples were characterized by scanning electron microscopy and energy dispersive X-ray analysis (SEM/EDS), powder X-ray diffraction (PXRD), infrared spectroscopy (FTIR) and by measurement of specific surface area. The effects of the adsorbent dosage (0.5, 1.0, 1.5 and 2.0 g), temperature (25, 35 and 45 °C) and initial nitrate concentration (C0= 100, 200 and 300 mg dm-3) on the binding efficiency were also studied. For all adsorbents the efficiency increases with temperature. The type of oxides effects the adsorption mechanism and Fe(III) oxide modified zeolite exhibits the best binding ability. For this adsorbent the adsorption kinetics was studied and found that it is best represented by the pseudo-second-order model. [Projekat Ministarstva nauke Republike Srbije, br. 172018]

Keywords

• natural zeolite
• clinoptilolite
• oxide-modified zeolite
• nitrate
• adsorption