Parameter Calibration and System Design of Material Lifting System for Inclined Shaft Construction

Abstract

As a key transportation equipment in the construction of long tunnels with large slope, the material hoisting system plays an important role in the transportation of materials in sloping shafts. This paper proposes a parameterized calibration scheme for the hoisting system based on the structure and working principle of the hoisting system, taking the wire rope, hoist, motor and overhead wheel as the research objects, and according to the relevant industry specifications and numerical calculation methods. Based on the structural design and functional analysis of the hoisting system, a reasonable control system, monitoring system and safety protection devices are designed, and the calibration scheme and the designed system are introduced into the Dianzhong water diversion project for verification. The parameters of each component of the hoisting system were calculated as follows: maximum breaking tension value of wire rope 490.29 KN, drum diameter 2000 mm, motor hoisting power 213.7 KW, and the system design was as follows: control system selects frequency conversion electric control method, safety protection device selects ZDC30-2.5 anti-running device. The results show that: the hoisting system components structure parameters meet the specification requirements—safety protection devices can effectively prevent the occurrence of sports car slippage and man-car jumping rail overturning accident—to meet the requirements of the construction period transport capacity and transport safety. The relevant experience can provide the basis for the design of a material hoisting system for a similar inclined shaft construction.

Keywords

• inclined shaft construction
• construction materials
• hoisting system
• parameter calibration