Experimental Investigation of Vortex-Tube Streamwise-Vorticity Characteristics and Interaction Effects with a Finite-Aspect-Ratio Wing

Abstract

An experimental study is conducted to analyze a streamwise-oriented vortex and investigate the unsteady interaction with a finite-aspect-ratio wing. A pressurized vortex tube is used to generate streamwise vortices in a wind tunnel and the resulting flow behavior is analyzed. The vortex tube, operated at various pressures, yields flows that evolve downstream under several freestream wind tunnel speeds. Flow measurements are performed using two- and three- dimensional (2D and 3D) particle image velocimetry to observe vortices and their freestream interactions from which velocity and vorticity data are comparatively analyzed. Results indicate that vortex velocity greater than freestream flow velocity is a primary factor in maintaining vortex structures further downstream, while increased supply pressure and reduced freestream velocity also reduce vortex dissipation rate. The generated streamwise-oriented vortex is also impinged on a finite-aspect-ratio airfoil wing with a cross-section of standard NACA0012 airfoil. The wingtip-aligned vortex is shown to investigate the interaction of the streamwise vortex and the wingtip vortex region. The results indicate that the vorticity at the high vortex-tube pressure has a significant effect on the boundary layer of airfoil.

Keywords

• particle image velocimetry
• tomography
• streamwise vorticity
• wingtip
• NACA0012 airfoil