Study on the basic properties of iron tailings powder-desulfurization ash mine filling cementitious material

Abstract

To realize the recycling of iron tailings powder (IP) and desulfurization ash (DA) and reduce the high preparation cost of mine filling cementitious materials (MCs), this article adopts sodium carbonate (SC) as an activator to prepare iron tailings powder-desulfurization ash mine filling cementitious materials (IDMC). The effects of IP content, DA content, SC content, and mirabilite content on the mechanical properties and setting time are experimentally investigated. The micromorphology and phase compositions of the hydration products of IDMC are analyzed and characterized by scanning electron microscopy and X-ray diffraction. The results show that the initial setting time of the IDMC is reduced by 0.87 and 21.83% when the mirabilite content is increased from 0 to 1% and 2%, respectively, and the compressive and flexural strengths of the IDMC are increased by 24.01 and 86.25% when the IP content is increased from 0 to 20%, respectively. The IP not only participates in the hydration reaction but also plays an aggregate filling effect, significantly improving the mechanical properties of the IDMC. The pozzolanic effect is gradually enhanced with the increase of the DA content, and the hydration degree of the IDMC increases. The SC as an activator can moderately reduce the shrinkage rate of the IDMC. Based on the multi-index optimization analysis, the optimal mix proportion of the IDMC is obtained, which provides an effective reference for the preparation of the novel MC.

Keywords

• mine filling
• cementitious material
• iron tailings powder
• desulfurization ash
• setting time
• mechanical property