Mathematics (Aug 2021)

Frequency Domain Feature Extraction Investigation to Increase the Accuracy of an Intelligent Nondestructive System for Volume Fraction and Regime Determination of Gas-Water-Oil Three-Phase Flows

  • Osman Taylan,
  • Mohammad Amir Sattari,
  • Imene Elhachfi Essoussi,
  • Ehsan Nazemi

DOI
https://doi.org/10.3390/math9172091
Journal volume & issue
Vol. 9, no. 17
p. 2091

Abstract

Read online

In this research, a methodology consisting of an X-ray tube, one Pyrex-glass pipe, and two NaI detectors was investigated to determine the type of flow regimes and volume fractions of gas-oil-water three-phase flows. Three prevalent flow patterns—namely annular, stratified, and homogenous—in various volume percentages—10% to 80% with the step of 10%—were simulated by MCNP-X code. After simulating all the states and collecting the signals, the Fast Fourier Transform (FFT) was used to convert the data to the frequency domain. The first and second dominant frequency amplitudes were extracted to be used as the inputs of neural networks. Three Radial Basis Function Neural Networks (RBFNN) were trained for determining the type of flow regimes and predicting gas and water volume fractions. The correct detection of all flow regimes and the determination of volume percentages with a Mean Relative Error (MRE) of less than 2.02% shows that the use of frequency characteristics in determining these important parameters can be very effective. Although X-ray radiation-based two-phase flowmeters have a lot of advantages over the radioisotope-based ones, they suffer from lower measurement accuracy. One reason might be that the X-ray multi-energy spectrum recorded in the detector has been analyzed in a simple way. It is worth mentioning that the X-ray sources generate multi-energy photons despite radioisotopes that generate single energy photons, therefore data analyzing of radioisotope sources would be easier than X-ray ones. As mentioned, one of the problems researchers have encountered is the lower measurement accuracy of the X-ray, radiation-based three-phase flowmeters. The aim of the present work is to resolve this problem by improving the precision of the X-ray, radiation-based three-phase flowmeter using artificial neural network (ANN) and feature extraction techniques.

Keywords