Application of TOPSIS for multi response optimization of Process Parameters in dry hard turning of AISI 52100 steel

Abstract

In the present work by employing the Technique for order of preference by similarity to ideal solution (TOPSIS) machining parameters optimization is performed with polycrystalline cubic boron nitride (PCBN) tools while AISI 52100 steel hard turning (HT). Based on the CCD of RSM, 32 experimental runs were performed by varying cutting speed, feed, depth of cut, nose radius, and negative rake angle to identify the optimal level of the process parameters. In this study, the multiple performance characteristics measured are machining force, surface roughness, and workpiece surface temperature. To ascertain the impact of cutting parameters on responses, Analysis of Variance (ANOVA) was deployed. An optimum combination of input process parameters for the multiple performance characteristics should be as follows: speed 200 rpm, feed 0.1 mm/rev, depth of cut 0.8 mm, nose radius 1.2 mm, and negative rake angle 45º leading to the value of optimum response variables machining force 561.163 N, Surface roughness 0.507μm and workpiece surface temperature 84.38°C.

Keywords

• machining force
• surface roughness
• workpiece surface temperature
• topsis
• optimization
• anova