Modular soft pneumatic actuator mimics elephant trunk locomotion

Abstract

Abstract Robots support and facilitate tasks in all life fields. Soft robots specifically have the advantages of inherent compliance, safe interaction and flexible deformability. Soft pneumatic network (Pneu-Net) is a soft pneumatic actuator (SPA) composed of network of chambers that is actuated by pneumatic power. Soft Pneu-Net fits the human interface applications perfectly. In this paper, a bio-inspired modular based design for Pneu-Net actuator is developed. The actuator mimics the elephant trunk curling to be employed for rehabilitation of human hand fingers. The actuator is an integrated four Pneu-Net modules actuator which is attached to hand’s finger. The main introduced advantages in the new developed actuator are: providing four degrees of freedom (DoF) essential for finger’s motion by single compound actuator and developing a methodology for a modular soft Pneu-Net actuator that is efficiently reproducible. The actuator’s design is developed using computer aided design (CAD) software SOLIDWORKS. The design is simulated using finite element modeling (FEM) software ABAQUS. Fabrication process uses 3D printed molds. Soft material is molded in the 3D printed molds, forming actuator’s modules. Actuator’s modules are integrated by adhesion using the soft material. A proposed non-standard hyper-elastic material biaxial tension test is introduced as a quick material properties identification method that can produce a test table used for material identification in the FEM. Enhanced version for the actuator uses reinforcement fibers. Results show advances for the reinforced actuator, as it limits the unwanted actuator’s strain and deformation. The reinforced actuator shows improved energy efficiency reaches to 46%.