Three-Dimensional Heat Transfer Analysis of a TG-CVI Reactor

Abstract

Thermal-gradient chemical vapor infiltration (TG-CVI) is an alternative process to the classical CVI by involving a temperature gradient to obtain uniform densification. It allows fabricating C/SiC and C/C composites starting from a fibrous preform and gasses precursor. The main interest of these processes is increasing the density homogeneity and the densification rate. In the proposed TG-CVI reactor, a heater with a constant temperature (1323 K) is placed in the core of the reactor and the cool gas flows from the outside to the center. Therefore, a continuous radially moving densification from inside to the outside of porous preform can be achieved. A numerical model was developed in order to investigate temperature distribution and velocity profile in the TG-CVI reactor. The commercial CFD software CFD-ACE+ was used. The obtained three-dimensional results were compared with experimental data. Three reference points were defined to measure the temperature in the preform. The computed results of TG-CVI showed a good agreement with the measured data. The simulation results of this study are important for the optimization of the densification process in the preform in The TG-CVI reactor.