Laboratory- and Semi-Industrial-Scale Thermomechanical Processing of TRIP-Aided Steel with Acicular Ferrite

Abstract

The modification of the deformation and cooling methods resulting in the obtainment of acicular ferrite promotes an increase in the proportion of retained austenite (RA) and a corresponding increase in mechanical properties in Si-Al TRIP-aided steel. The effect of controlled thermomechanical processing in laboratory- and semi-industrial scales on the possibility of obtaining acicular ferrite and a high fraction of retained austenite was investigated. The steel was hot deformed in three steps: at 1050, 900 and 750 °C to introduce dislocations into the hot-deformed pancake austenite. Next, slow cooling in a ferritic transformation region was performed, followed by isothermal holding of steel at 450 °C. The interrupted tensile tests at the strain levels of 5, 10 and 15% were performed to investigate the mechanical properties response and the stability of the obtained retained austenite. Light and scanning electron microscopy, XRD and EBSD analyses were performed to assess microstructural features. The produced material showed a multiphase microstructure containing acicular ferrite and 10% of retained austenite. The microstructures obtained in both production methods were slightly different due to high temperature inertia in the semi-industrial process.

Keywords

• TRIP steel
• retained austenite
• interrupted tensile test
• acicular ferrite