Cusp Phased Metasurfaces for Wideband RCS Reduction Under Broad Angles of Incidence

Abstract

This article presents an efficient and effective design approach of the phase distribution calculation across metasurface for significant radar cross section (RCS) reduction of a circular polarization (CP) and liner polarization (LP) radar waves. The RCS reduction using the proposed design approach is achieved by imposing a novel cusp phase mask (which is usually used to generate 3D self-accelerating and self-healing cusp beams) at each geometric phased anisotropic unit cell composing the proposed cusp phased metasurface. By solving the cusp phase formula using MATLAB, it is found that the cusp phase mask required to achieve more than 10 dB of RCS reduction over a wide frequency band can be calculated without the need of significant lengthy optimizations or huge computer resources. The ability of such cusp phase mask metasurfaces to achieve significant backward scattering and RCS reduction has been rigorously investigated by means of simulations and measurements. When illuminated by a far-field radar CP or LP plane wave, the proposed cusp phased metasurface realizes more than 10 dB of RCS reduction from 10.9 to 26 GHz, corresponding to a fractional bandwidth of FBW = 81.8%. The 10 dB RCS reduction bandwidth of the cusp metasurface is maintained under both normal and wide angular incidence up to 75o. The proposed cusp metasurfaces have potential applications to make objects stealthy where the incidence radar signal has an unknown frequency, polarization, or angle of incidence.

Keywords

• Metasurface
• radar cross section
• stealth
• antenna array
• scattering
• reflectarray