Scientific Reports (Mar 2024)

Effects of train vibration load on the structure and hydraulic properties of soils

  • Kai Han,
  • Jiading Wang,
  • Tao Xiao,
  • Shan Li,
  • Dengfei Zhang,
  • Haoyu Dong

DOI
https://doi.org/10.1038/s41598-024-57956-5
Journal volume & issue
Vol. 14, no. 1
pp. 1 – 17

Abstract

Read online

Abstract Investigating the impact of train-induced vibration loads on soil hydraulic properties, this study conducted experiments using a self-designed indoor soil seepage platform that incorporates vibration loads. The experiments were complemented with scanning electron microscopy to analyze the influence of train-induced vibration loads on soil hydraulic conductivity and its evolutionary characteristics under different vibration frequencies. The experimental results indicated that as the vibration frequency increases from no vibration (0 Hz) to 20 Hz, the time required for the soil volumetric moisture content to reach its peak and stabilize decreases rapidly. However, after the vibration frequency exceeds 20 Hz, the rate at which the time required for the volumetric moisture content to reach its peak and stabilize decreases slows down. Furthermore, the soil pore water pressure increases with the increase in vibration frequency. At a vibration frequency of 80 Hz, the peak value of pore water pressure increases by 105% compared to the non-vibration state, suggesting that higher vibration frequencies promote the development and acceleration of soil pore moisture migration. Additionally, as the vibration frequency increases, the soil hydraulic conductivity initially experiences a rapid increase, with a growth rate ranging from 40.1 to 47.4%. However, after the frequency exceeds 20 Hz, this growth rate significantly decreases, settling to only 18.6% to 7.8%. When the soil was subjected to a vibration load, the scanning electron microscopy test revealed alterations in its pore structure. Micropores and small pores transformed into macropores and mesopores. Additionally, the microstructural parameters indicated that vibration load decreased the complexity of soil pores, thereby speeding up the hydraulic conduction process. This, in turn, affected the hydraulic properties of the soil and established a relationship between pore structure complexity and soil hydraulic properties.

Keywords