Journal of Rock Mechanics and Geotechnical Engineering (Jul 2024)

Numerical modeling of fracture propagation of supercritical CO2 compound fracturing

  • Hao Chen,
  • Yong Kang,
  • Wanchun Jin,
  • Changhai Li,
  • Can Cai

Journal volume & issue
Vol. 16, no. 7
pp. 2607 – 2628

Abstract

Read online

The exploitation of shale gas is promising due to depletion of the conventional energy and intensification of the greenhouse effect. In this paper, we proposed a heat-fluid-solid coupling damage model of supercritical CO2 (SC-CO2) compound fracturing which is expected to be an efficient and environmentally friendly way to develop shale gas. The coupling model is solved by the finite element method, and the results are in good agreement with the analytical solutions and fracturing experiments. Based on this model, the fracture propagation characteristics at the two stages of compound fracturing are studied and the influence of pressurization rate, in situ stress, bedding angle, and other factors are considered. The results show that at the SC-CO2 fracturing stage, a lower pressurization rate is conducive to formation of the branches around main fractures, while a higher pressurization rate inhibits formation of the branches around main fractures and promotes formation of the main fractures. Both bedding and in situ stress play a dominant role in the fracture propagation. When the in situ stress ratio (σx/σy) is 1, the presence of bedding can reduce the initiation pressure and failure pressure. Nevertheless, it will cause the fracture to propagate along the bedding direction, reducing the fracture complexity. In rocks without bedding, hydraulic fracturing has the lengthening and widening effects for SC-CO2 induced fracture. In shale, fractures induced at the hydraulic fracturing stage are more likely to be dominated by in situ stresses and have a shorter reorientation radius. Therefore, fracture branches propagating along the maximum principal stress direction may be generated around the main fractures induced by SC-CO2 at the hydraulic fracturing stage. When the branches converge with the main fractures, fracture zones are easily formed, and thus the fracture complexity and damage area can be significantly increased. The results are instructive for the design and application of SC-CO2 compound fracturing.

Keywords